If you are new to fishing then you might be fighting with various problems. It is alright to have problems at the beginning because even experts suffer from problems every now and then. There are few things that you need to know in order to master the art of fishing. Setting up a baitcasting reel is one of the most important things from that category.
With proper technique you can enjoy the smoothest casting without even experiencing the most common problems. With the mention of common problem backlashes should jump right in your mind. During the first few encounters backlashes may keep happening out of nowhere.[responsive_video type=’youtube’ hide_related=’0′ hide_logo=’0′ hide_controls=’0′ hide_title=’0′ hide_fullscreen=’0′ autoplay=’0′]https://www.youtube.com/ watch?v=cwGNLqXEJYY[/responsive_video]
There is a solution for every problem. Here is the guided solution for you to set up your baitcasting reel and enjoy the smoothest casting. The most important steps that you need to keep in check are:
- Choosing the right line
- Spool tension
- The brake system
- Setting the drag
Table of Contents
Choosing the right line:
There are various lines to choose from and they all have their own benefits. You should only focus to learn during your early stage of fishing. There will come a time when you can do whatever you want with the skills that you have learnt. Do not try to imitate others while you should only focus to learn every single tip and trick of your passion. The best choice of line during this stage is mono filament.
The other types of lines for example fluorocarbon or braid of course has some benefits, but they are not for you yet as they tend to make very dirty backlashes. In order to get rid of the backlash you may need to cut your line to get out of the situation. Cutting the line is not an ideal solution.
Setting the spool tension is the critical step for your baitcasting reel. Usually manufacturers place it on the same side along with the handle and drag. As the critical stage you need to be more attentive. This step must be repeated every time you need to change the bait. Hold your rod up and place the lure 10-12 inches of the line. After tightening the tension, let the lure fall by pushing the thumb bar. Make adjustment to the tension knob so the lure starts falling down on its own and stops while it lands on something.
The brake system:
There are multiple brake system available for you, but sticking with similar settings will make ease for you. The main two types of brakes are the centrifugal brakes and the magnetic brakes. People tend to grab on the work principles of the magnetic brake system in no time as it has less complexity than the centrifugal system. There is also another brake system that combines these two systems and it is called the hybrid system. The brake system requires some time and practice to get used to it too.
Setting the drag:
This is the final and easiest step for your baitcasting reel. This has a star like shape and turning this forward will tighten the drag and to get the opposite result turn it toward you. Hope the whole process was easier than you expected.
You May Like These